CLI Guide

• RBAL: The ADAPT disk group is being rebalanced.
• RCON: At least one disk in the disk group is being reconstructed.
• VDRAIN: The virtual disk group is being removed and its data is being drained to another disk group.
• VPREP: The virtual disk group is being prepared for use in a virtual pool.
• VRECV: The virtual disk group is being recovered to restore its membership in the virtual pool.
• VREMV: The disk group and its data are being removed.
• VRFY: The disk group is being verified.
• VRSC: The disk group is being scrubbed.
• Blank if no job is running.
Current Owner
Shown by the detail parameter. See Own, below.
Disks
The number of disks in the disk group.
Free
The amount of free space in the disk group, formatted to use the current base, precision, and units.
Health
• OK
• Degraded
• Fault
• N/A
• Unknown
Health Reason
Shown by the detail parameter. See Reason, below.
Health Recommendation
Shown by the detail parameter. See Action, above.
Job%
• 0%-99%: Percent complete of running job
• Blank if no job is running (job has completed)
Name
The name of the disk group.
Own
Either the preferred owner during normal operation or the partner controller when the preferred owner is
offline.
Pool
The name of the pool that contains the disk group.
Preferred Owner
Shown by the detail parameter. Controller that owns the disk group and its volumes during normal operation.
RAID
The RAID level of the disk group.
Reason
If Health is not OK, this field shows the reason for the health state.
Sec Fmt
The sector format of disks in the disk group.
• 512n: All disks use 512-byte native sector size. Each logical block and physical block is 512 bytes.
Alphabetical list of commands
175