CLI Guide

Data Written
The amount of data written since these statistics were last reset or since the controller was restarted.
Num Forwarded Cmds
The current count of commands that are being forwarded or are queued to be forwarded to the partner
controller for processing. This value will be zero if no commands are being forwarded or are queued to be
forwarded.
Reset Time
The date and time, in the format year-month-day hour:minutes:seconds, when these statistics
were last reset, either by a user or by a controller restart.
The total amount of hours the controller has been powered on in its lifetime.Total Power On Hours
Examples Show statistics for controller A.
# show controller-statistics a
Basetypes
controller-statistics
status
See also
reset all-statistics
reset controller-statistics
show debug-log-parameters
Description
Shows which debug message types are enabled (On) or disabled (Off) for inclusion in the Storage Controller
debug log.
NOTE: This command is for use by or with direction from technical support.
Minimum role monitor
Syntax show debug-log-parameters
Output For a description of each message type parameter, see set debug-log parameters.
Examples Show debug log parameters.
# show debug-log-parameters
Basetypes debug-log-parametersstatus
See also set debug-log-parameters
show disk-groups
Description
Shows information about disk groups. The command will show information for all disk groups by default, or
you can use parameters to filter the output.
Minimum role monitor
Syntax
show disk-groups
[detail]
[pool pool]
[disk-groups]
Parameters
[detail]
Optional. This parameter shows additional detail about disk groups.
[pool pool]
Alphabetical list of commands 173