CLI Guide

# scrub volume vol1
See also
set advanced-settings
abort scrub (with the volume parameter)
show volumes
send support-assist-logs
Description Sends storage-system log files to the SupportAssist server. Use this command to force collection and
transmittal of log data to the server, instead of waiting for the SupportAssist feature to do so automatically.
Data collected and sent includes:
• Current configuration state of the storage system
• XML API dump of the system
• Event log
• Full debug log
Data for both controllers is sent in a single zip file.
Minimum role monitor
Syntax
send support-assist-logs
Examples Send storage-system log files to the SupportAssist server.
# send support-assist-logs
See also
check support-assist
set support-assist
set support-assist-info
show support-assist
set advanced-settings
Description
Sets advanced system configuration parameters.
Minimum role manage
Syntax
set advanced-settings
[auto-stall-recovery enabled|disabled|on|off]
[auto-write-back enabled|disabled|on|off]
[background-disk-scrub enabled|disabled|on|off]
[background-scrub enabled|disabled|on|off]
[background-scrub-interval interval]
[compact-flash-failure enabled|disabled|on|off]
[controller-failure enabled|disabled|on|off]
[dynamic-spares enabled|disabled|on|off]
[emp-poll-rate rate]
[fan-failure enabled|disabled|on|off]
[host-cache-control enabled|disabled|on|off]
[large-pools enabled|disabled|on|off]
[managed-logs enabled|disabled|on|off]
104 Alphabetical list of commands