CLI Guide

Table 91. redundancy properties (continued)
Name Type Description
● 1496: Unknown
refresh-counters
This basetype is used by show refresh-counters on page 233
Table 92. refresh-counters properties
Name Type Description
basetype-name (Not
shown)
Shows when the data represented by the base type was last updated.
● 0: The data has never been updated and is not cached.
● nonzero-number : A timestamp indicating that the data has been updated.
If the value has changed since the last time you called this command then the
data has changed.
remote-ports
This basetype is used by show peer-connections on page 217.
Table 93. remote-ports properties
Name Type Description
remote-host-port string The ID of the port in the remote system.
port-address string The assigned port address.
remote-ports-detail
This basetype is used by show peer-connections on page 217 when the verify-links parameter is specified.
Table 94. remote-ports-detail parameters
Name Type Description
remote-host-port string The ID of the port in the remote system.
port-address string The assigned port address.
local-links string The IDs of linked ports in the local system.
remote-system
This basetype is used by show remote-systems on page 233.
Table 95. remote-system properties
Name Type Description
id string Remote system ID.
system-name string
● The name of the remote system.
● Uninitialized Name : The default value.
system-contact string
● The name of the person who administers the remote system.
API basetype properties 383