CLI Guide

Table 74. network-parameters properties (continued)
Name Type Description
ping-broadcast string
● Enabled: The system will respond to a broadcast ping.
Disabled: The system will not respond to a broadcast ping.
ping-broadcast-numeric uint32
Numeric equivalents for ping-broadcast values.
● 0: Disabled
● 1: Enabled
ntp-status
This basetype is used by show ntp-status on page 217.
Table 75. ntp-status properties
Name Type Description
ntp-status string Shows whether use of Network Time Protocol (NTP) is enabled.
● activated: NTP is enabled.
● deactivated: NTP is disabled.
ntp-server-address string
● The current NTP server IP address if NTP is enabled.
● The last-set NTP server IP address if NTP was enabled and has been disabled.
● 0.0.0.0 if the NTP server IP address has not been set.
ntp-contact-time string (UTC), of the last message received from the NTP server.
● Date and time, in the format year-month-day hour:minutes:seconds
(UTC), of the last message received from the NTP server.
● none: No contact.
peer-connection-info
This basetype is used by query peer-connection on page 87.
Table 76. peer-connection-info properties
Name Type Description
system-name string The name of the system.
system-contact string The name of the person who administers the system.
system-location string The location of the system.
system-information string A brief description of what the system is used for or how it is configured.
midplane-serial-number string The serial number of the controller enclosure midplane.
vendor-name string The vendor name.
product-id string The product model identifier.
license-key and other license
properties
See license on page 361.
peer-controllers Embedded; see peer-controllers on page 368.
API basetype properties 367