CLI Guide

Table 25. cs-replication-set-properties (continued)
Name Type Description
● disabled or off: A snapshot history will not be kept.
● secondary: A snapshot history set will be kept on the secondary system for
the secondary volume.
● both: A snapshot history will be kept for the primary volume on the primary
system and for the secondary volume on the secondary system.
snapshot-history-numeric uint32 Numeric equivalents for snapshot-history values.
● 0: disabled
● 1: secondary
● 2: both
snapshot-count uint32 The number of snapshots to retain in snapshot history. When a new snapshot
exceeds this limit, the oldest snapshot in the snapshot history is deleted.
snapshot-basename string The user-defined prefix for the snapshots.
retention-priority string The retention priority for snapshots, which is used when automatic deletion of
snapshots is enabled by using the set snapshot-space on page 149 command. In
a snapshot tree, only leaf snapshots can be deleted automatically. Deletion based
on retention priority is unrelated to deleting the oldest snapshots to maintain a
snapshot count.
● never-delete: Snapshots will never be deleted automatically to make
space. The oldest snapshot in the snapshot history will be deleted once the
snapshot-count value has been exceeded.
● high: Snapshots can be deleted after all eligible medium-priority snapshots
have been deleted.
● medium: Snapshots can be deleted after all eligible low-priority snapshots
have been deleted.
● low: Snapshots can be deleted.
retention-priority-numeric uint32
Numeric equivalents for retention-priority-numeric values.
● 0: never-delete
● 1: low
● 2: medium
● 3: high
status string
● Not Ready: The replication set is not ready for replications because the
system is still preparing the replication set.
● Unsynchronized: The primary and secondary volumes are unsynchronized
because the system has prepared the replication set, but the initial replication
has not run.
● Running: A replication is in progress.
● Ready: The replication set is ready for a replication.
● Suspended: Replications have been suspended.
● Unknown: This system cannot communicate with the primary system and
thus cannot be sure of the current state of the replication set. Check the
state of the primary system.
status-numeric uint32 Numeric equivalents for status values.
failback-in-progress string Not supported.
failback-in-progress-numeric uint32 Not supported.
failback-sync- complete string Not supported.
failback-sync-complete-
numeric
uint32 Not supported.
API basetype properties 309