CLI Guide

Output
License Key
The license key, licensing serial number, and status of licensed features. All licensed features are
enabled.
show maps
Description
Shows information about mappings between volumes and initiators. If no parameter is specified, this
command shows explicit mappings (but not default mappings) for all volumes.
In a dual-controller system, if a mapping uses corresponding ports on both controllers, such as A1 and
B1, the Ports field will simply show 1.
Minimum role monitor
Syntax
show maps
[all]
[initiator]
[IDs]
Parameters
all
Optional. Shows mappings of all access types: read-write, read-only, no-access, and not-mapped
(default mappings). If this parameter is omitted, mappings of type not-mapped are not shown.
initiator
Optional. Shows mapping information by initiator. If this parameter is omitted, mapping information is
shown by volume.
IDs
Optional. A comma-separated list of the names or serial numbers of host-type items (initiators, hosts,
and host groups) or volume-type items (volumes and volume groups) for which to show mappings. If
a volume is mapped to a host group, to see mappings you must specify the host group, not a host or
initiator in the group. If a volume is mapped to a host, to see mappings you must specify the host, not
an initiator in the group.
You can specify:
● A host by name in the format host-name.*, where * represents all initiators in the host. Example:
FC-Server.*
● A host group by name in the format host-group.*.*, where the first * represents all hosts in the
group and the second * represents all initiators in those hosts. Example: TestLab.*.*
● A volume group by name in the format volume-group.*, where * represents all volumes in the
group. Example:TestVolumes.*
Do not include both host-type and volume-type items in a list. A name that includes a space must be
enclosed in double quotes.
Output
Properties are described in alphabetical order.
Access
Type of host access to the volume:
● read-write: Read and write.
● read-only: Read only.
● no-access: No access (masked).
● not-mapped: Not mapped.
Group Name
For a volume group, its name in the format volume-group.*, where the * represents all volumes in
the group.
ID
214 Alphabetical list of commands