CLI Guide

[interfaces interfaces]
Optional. Specifies the interfaces that the user can access. Multiple values must be separated by
commas and no spaces
● cli: Command-line interface. This is enabled by default.
● wbi: PowerVault Manager web-browser interface. This is enabled by default.
● ftp: FTP or SFTP interface.
● smis: Storage Management Initiative Specification (SMI-S) interface.
● snmpuser: Allows an SNMPv3 user to view the SNMP MIB.
● snmptarget: Allows an SNMPv3 user to receive SNMP trap notifications. This option requires
the trap-host parameter.
● none: No interfaces.
The smis option is not supported for a user with the monitor or diagnostic role. A command that
specifies snmpuser or snmptarget cannot also specify a non-SNMP interface. To enable or disable
protocols that can be used to access interfaces, use the set protocols command.
[locale English|en|Spanish|es|French|fr|German|de|Japanese|ja|Korean|ko|
nl|Chinese-simplified|zh-s|zh-t]
Optional. The display language. The default is English.
[password password]
Optional in console format; required for API format. Input rules:
● The value is case sensitive.
● The value can have 8–32 characters.
● The value can include spaces and printable UTF-8 characters except: " , < >\
● A value that includes only printable ASCII characters must include at least one uppercase
character, one lowercase character, one numeric character, and one non-alphanumeric character.
● For an SNMPv3 user whose authentication-type parameter is set to use authentication, this
specifies the authentication password.
[precision #]
Optional. Sets the number of decimal places (1–10) for display of storage-space sizes. The default is
1.
[privacy-password encryption-password]
Optional. For an SNMPv3 user whose privacy-type parameter is set to use encryption, this specifies
the encryption password. The value is case sensitive and must contain 8–32 characters. A password
cannot contain the following characters: angle brackets, backslash, comma, double quote, single
quote, or space. If the password contains only printable ASCII characters then it must contain
at least one uppercase character, one lowercase character, one numeric character, and one non-
alphanumeric character.
[privacy-type DES|AES|none]
Optional. For an SNMPv3 user, this specifies whether to use a security encryption protocol.
This parameter requires the privacy-password parameter and the authentication-type
parameter.
● DES: Data Encryption Standard.
● AES: Advanced Encryption Standard.
● none: No encryption. This is the default.
[roles roles]
Optional. Specifies the user’s roles as one or more of the following values:
● monitor: User can view but not change system settings. This is the default.
● manage: User can view and change system settings.
● diagnostic: User can view and change system settings.
Multiple values must be separated with a comma (with no spaces). If multiple values are specified,
the user’s access to commands will be determined by the highest role specified.
[session-preferences]
Alphabetical list of commands
159