CLI Guide

reset controller-statistics
reset disk-group-statistics
reset disk-statistics
reset host-port-statistics
reset pool-statistics
reset vdisks-statistics
reset volume-statistics
show controller-statistics
reset controller-statistics
Description Resets performance statistics for controllers.
This command resets all controller statistics except Power On Time and Total Power On Hours.
Minimum role manage
Syntax
reset controller-statistics
[a|b|both]
Parameters
a|b|both
Optional. Specifies whether to reset statistics for controller A, B, or both. If this parameter is omitted,
statistics are reset for both controllers.
Examples Reset statistics for both controllers.
# reset controller-statistics
See also
reset all-statistics
reset disk-error-statistics
reset controller-statistics
reset disk-group-statistics
reset disk-statistics
reset host-port-statistics
reset pool-statistics
reset vdisks-statistics
reset volume-statistics
show controller-statistics
reset disk-error-statistics
Description
Resets error statistics for all or specified disks. Statistics that are reset include:
• Number of SMART events recorded
• Number of I/O timeouts accessing the disk
• Number of times the disk did not respond
• Number of attempts by the controllers to spin up the disk
• Number of media errors (errors generated by the disk as specified by its manufacturer)
• Number of non-media errors (errors generated by the controllers or by the disk and not categorized as
media errors)
• Number of block reassignments
92 Alphabetical list of commands