CLI Guide

Table 143. volumes properties (continued)
Name Type Description
• Copy Destination : The volume is the destination for a volume copy operation.
• Primary: The volume is the primary volume in a replication set.
• Secondary: The volume is the secondary volume in a replication set.
• (blank): Not applicable.
cs-copy-dest string
• Off: Not applicable.
• On: The volume is the destination for a volume copy operation.
cs-copy-dest-numeric uint32 Numeric equivalents for cs-copy-dest values.
• 0: Off
• 1: On
cs-copy-src string
• Off: Not applicable.
• On: The volume is the source for a volume copy operation.
cs-copy-src-numeric uint32 Numeric equivalents for cs-copy-src values.
• 0: Off
• 1: On
cs-primary string
• Off: Not applicable.
• On: The volume is the primary volume in a replication set.
cs-primary-numeric uint32 Numeric equivalents for cs-primary values.
• 0: Off
• 1: On
cs-secondary string
• Off: Not applicable.
• On: The volume is the secondary volume in a replication set.
cs-secondary-numeric
uint32
Numeric equivalents for cs-secondary values.
• 0: Off
• 1: On
health string Numeric equivalents for health values.
• OK
• Degraded
• Fault
• Unknown
• N/A
health-numeric uint32 Numeric equivalents for health values.
• 0: OK
• 1: Degraded
• 2: Fault
• 3: Unknown
• 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
volume-group string If the volume is in a volume group, the name of the group. Otherwise,
UNGROUPEDVOLUMES .
430 API basetype properties