CLI Guide

Table 140. volume-group-view-mappings properties (continued)
Name Type Description
access-numeric uint32 Numeric equivalents of access values.
• 0: not-mapped
• 1: no-access
• 2: read-only
• 3: read-write
initiator-id string
• For an FC initiator, its WWPN.
• For a SAS initiator, its WWPN.
• For an iSCSI initiator, its node name (typically the IQN).
• all other initiators: The volume's default mapping.
nickname string
• For a host, its name in the format host-name.* , where the *
represents all initiators in the host.
• For a host group, its name in the format host-group.*.* , where the
first * represents all hosts in the host group and the second * represents
all initiators in those hosts.
• Blank if not set or for all other initiators.
host-profile string Standard: Default profile.
host-profile-numeric uint32 Numeric equivalents of host-profile values.
0: Standard
lun-view Embedded; see volume-view-mappings on page 432.
volume-names
This basetype is used by show volume-names.
Table 141. volume-names properties
Name Type Description
volume-name string Volume name.
serial-number string Volume serial number.
volume-reservations
This basetype is used by show volume-reservations.
Table 142. volume-reservations
Name Type Description
volume-name string The name of the volume.
serial-number string The serial number of the volume.
reservation-active string
• Free: The volume is not reserved.
• Reserved: The volume has been reserved by a host.
reservation- active-numeric uint32 Numeric equivalents for reservation-active values.
• 0: Free
• 1: Reserved
pgr-generation uint32 The generation of the volume reservation, shown as a hexadecimal value.
API basetype properties 425