CLI Guide

Table 137. virtual-disks properties (continued)
Name Type Description
Enabled - all spinning: DSD is enabled for the disk group.
Partial spin-down: DSD is enabled for the disk group and its disks are partially
spun down to conserve power.
Full spin-down: DSD is enabled for the disk group and its disks are fully spun
down to conserve power.
disk-dsd-enable-vdisk-numeric uint32 Numeric equivalents for disk-dsd-enable-vdisk values.
0: Disabled
1: Enabled - all spinning
2: Partial spin-down
3: Full spin-down
disk-dsd-delay-vdisk uint32 For spinning disks, the period of inactivity after which the disks and dedicated spares in
a disk group will automatically spin down, from 1 to 360 minutes. The value 0 means spin
down is disabled.
pool-sector-format string The sector format of disks in the disk group.
512n: All disks use 512-byte native sector size. Each logical block and physical block
is 512 bytes.
512e: All disks use 512-byte emulated sector size. Each logical block is 512 bytes
and each physical block is 4096 bytes. Eight logical blocks will be stored sequentially
in each physical block. Logical blocks may or may not be aligned with physical block
boundaries.
Mixed: The disk group contains a mix of 512n and 512e disks. This is supported, but
for consistent and predictable performance, do not mix disks of different sector size
types (512n, 512e).
pool-sector-format-numeric uint32 Numeric equivalents for pool-sector-numeric values.
0: 512n
1: 512e
3: Mixed
health string
OK
Degraded
Fault
Unknown
N/A
health-numeric uint32 Numeric equivalents for health values.
0: OK
1: Degraded
2: Fault
3: Unknown
4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
unhealthy-component Embedded; see unhealthy-component on page 412.
API basetype properties 423