CLI Guide

snmp-parameters
This basetype is used by show snmp-parameters on page 239.
Table 115. snmp-parameters properties
Name Type Description
snmp-enabled string Shows whether the Simple Network Management Protocol (SNMP) interface is
enabled or disabled.
• Disabled—SNMP is disabled.
• Enabled—SNMP is enabled.
snmp-enabled- numeric uint32 Numeric equivalents for snmp-enabled values.
• 0: Disabled
• 1: Enabled
snmp-filter string Minimum level of events to include for SNMP traps
• crit—Sends notifications for Critical events only.
• error—Sends notifications for Error and Critical events.
• warn—Sends notifications for Warning, Error, and Critical events.
• resolved—Sends notifications for Resolved, Warning, Error, and Critical events.
• info—Sends notifications for all events.
• none—No events are sent as traps and traps are disabled.
snmp-filter- numeric uint32 Numeric equivalents for snmp-filter values.
• 0: info
• 1: resolved
• 2: warn
• 3: error
• 4: crit
• 5: none
snmp-trap-host-1 string Trap host IP address.
snmp-trap-host-2 string Trap host IP address.
snmp-trap-host-3 string Trap host IP address.
snmp-read- community string The community string for read-only access. The value is obscured for users having only
the monitor role and is shown in clear text for users having the manage role.
snmp-write- community string The community string for write access. The value is obscured for users having only the
monitor role and is shown in clear text for users having the managerole.
spares-preview
This basetype is used by add storage on page 35 when the preview parameter is specified.
Table 116. spares-preview properties
Name Type Description
location string Disk enclosure ID and slot number.
type string Disk description.
• SAS: Enterprise SAS spinning disk.
• SAS MDL: Midline SAS spinning disk.
• SSD SAS: SAS solid-state disk.
API basetype properties 399