CLI Guide

Table 100. sas-host-phy-statistics properties (continued)
Name Type Description
lost-dwords uint32 The number of times the PHY has lost doubleword synchronization and restarted the
Link Reset sequence.
invalid-dwords uint32 The number of invalid doublewords that have been received by the PHY, not including
those received during Link Reset sequences.
reset-error-counter uint32 The number of times the PHY Reset sequence has failed.
sas-port
This basetype is used by show ports on page 219 for a SAS host port.
Table 101. sas-port properties
Name Type Description
configured-topology string
• Direct
width uint8 Number of PHY lanes in the SAS port.
sas-lanes-expected uint8 Expected number of PHY lanes in the SAS port.
sas-active-lanes uint8 Number of active lanes in the SAS port. If the port is connected and fewer lanes are
active than are expected, the port status will change to Warning, the health will
change to Degraded , and event 354 will be logged.
sas-disabled-lanes uint8 Number of disabled lanes in the SAS port.
sas-status-controller-a
This basetype is used by show expander-status for controller A and controller B.
Table 102. sas-status-controller-a properties
Name Type Description
enclosure-id uint32 Enclosure ID.
drawer-id
(5U84 enclosure)
uint8
• 0 : Top
• 1 : Bottom
drawer-id
(2U12/24 enclosure)
uint8 Not applicable ( 255 ).
expander-id uint8 Expander ID.
controller string
• A : Controller A.
• B : Controller B.
controller-numeric uint32 Numeric equivalents for controller values.
• 0: B
• 1: A
wide-port-index uint32 The wide-port index.
phy-index uint32 The PHY index.
wide-port-role string The wide-port role.
• Unknown
• Drive
384 API basetype properties