CLI Guide

midplane-versions
This basetype is used by show versions on page 258 when the frus parameter is specified.
Table 74. midplane-versions properties
Name Type Description
vpd-format-version string Vital Product Data (VPD) version.
vpd-crc string VPD CRC.
cfg-mismatch- version string Configuration mismatch version.
cpld-version string Complex Programmable Logic Device (CPLD) firmware version.
fru-descriptor string FRU descriptor.
part-number string Midplane part number.
midplane-serial- number string Midplane serial number.
network-parameters
This basetype is used by show network-parameters on page 210.
Table 75. network-parameters properties
Name Type Description
durable-id string Controller network port ID in the format mgmtport_controller-ID
active-version uint32 The configured network port IP version.
• 4: IPv4
• 6: IPv6
ip-address string Controller network port IP address.
gateway string Controller network port gateway IP address
subnet-mask string Controller network port IP subnet mask
mac-address string Controller network port MAC address.
addressing-mode string
• Manual: Network settings are set manually (statically).
• DHCP: DHCP is used to set network parameters.
addressing-mode-numeric uint32 Numeric equivalents for addressing-mode values.
• 1: Manual
• 2: DHCP
link-speed string
• Unknown: For a system operating in Single Controller mode, this controller module
is not present.
• 10mbps: The network port link speed is set to 10 Mb/s.
• 100mbps: The network port link speed is set to 100 Mb/s.
• 1000mbps: The network port link speed is set to 1000 Mb/s.
link-speed-numeric uint32 Numeric equivalents for link-speed values.
• 0: 10mbps
• 1: 100mbps
• 2: 1000mbps
362 API basetype properties