CLI Guide

Table 63. inquiry properties (continued)
Name Type Description
ip-address string Controller network port IP address.
ip6-link-local-address string The link-local IPv6 address.
ip6-auto-source-address string The automatically configured IPv6 address, when applicable.
ip6-auto-address-source-
numeric
uint32 The method used to assign or compute the automatic address:
• 0: DHCPv6
• 1: IPv6 SLAAC
ip61-address string First IPv6 address for the controller management port, if set.
ip62-address string Second IPv6 address for the controller management port, if set.
ip63-address string Third IPv6 address for the controller management port, if set.
ip64-address string Fourth IPv6 address for the controller management port, if set.
nvram-defaults string For internal use only.
io-modules
This basetype is used by show enclosures on page 191 for an expansion module.
Table 64. io-modules properties
Name Type Description
durable-id string Expansion module ID.
controller-id string
• A: Controller A.
• B: Controller B.
controller-id-numeric uint32 Numeric equivalents for controller-id values.
• 0: B
• 1: A
name string FRU name.
description string FRU long description.
part-number string FRU part number.
serial-number string FRU serial number.
revision string FRU hardware revision level.
dash-level string FRU template revision number.
fru-shortname string FRU short description.
mfg-date string Date and time, in the format year-month-day hour:minutes:seconds (UTC),
when the PCBA of the controller was programmed or a power supply module was
manufactured.
mfg-date-numeric uint32 Unformatted mfg-date value.
mfg-location string City, state/province, and country where the FRU was manufactured.
mfg-vendor-id string JEDEC ID of the FRU manufacturer.
position string FRU position, as viewed from the back of the enclosure.
• Left
• Right
352 API basetype properties