CLI Guide

Table 28. debug-log-parameters properties (continued)
Name Type Description
awt-numeric uint32 Numeric equivalents for awt values.
• 0: Off
• 1: On
res2 string Shows whether internal debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled.
res2-numeric uint32 Numeric equivalents for res2 values.
• 0: Off
• 1: On
capi2 string Shows whether Internal Configuration API tracing messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
capi2-numeric uint32 Numeric equivalents for capi2 values.
• 0: Off
• 1: On
dms string Not used.
dms-numeric uint32 Not used.
fruid string Shows whether FRU ID debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled.
fruid-numeric uint32 Numeric equivalents for fruid values.
• 0: Off
• 1: On
resmgr string Shows whether Reservation Manager debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
resmgr-numeric uint32 Numeric equivalents for resmgr values.
• 0: Off
• 1: On
init string Shows whether host-port initiator mode debug messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
init-numeric uint32 Numeric equivalents for init values.
• 0: Off
• 1: On
API basetype properties 309