CLI Guide

Table 28. debug-log-parameters properties (continued)
Name Type Description
raid-numeric uint32 Numeric equivalents for raid values.
• 0: Off
• 1: On
cache string Shows whether cache debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled.
cache-numeric uint32 Numeric equivalents for cache values.
• 0: Off
• 1: On
emp string Shows whether Enclosure Management Processor debug messages are enabled for
inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
emp-numeric uint32 Numeric equivalents for emp values.
• 0: Off
• 1: On
capi string Shows whether Internal Configuration API debug messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
capi-numeric uint32 Numeric equivalents for capi values.
• 0: Off
• 1: On
mui string Shows whether internal service interface debug messages are enabled for inclusion in
the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
mui-numeric uint32 Numeric equivalents for mui values.
• 0: Off
• 1: On
bkcfg string Shows whether internal configuration debug messages are enabled for inclusion in the
Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
bkcfg-numeric uint32 Numeric equivalents for bkcfg values.
• 0: Off
• 1: On
awt string Shows whether debug messages for auto-write-through cache triggers are enabled for
inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
308 API basetype properties