CLI Guide

Table 28. debug-log-parameters properties (continued)
Name Type Description
ioa-numeric uint32 Numeric equivalents for ioa values.
• 0: Off
• 1: On
iob string Shows whether resource-count debug messages for an I/O interface driver are enabled
for inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
iob-numeric uint32 Numeric equivalents for iob values.
• 0: Off
• 1: On
ioc string Shows whether upper-layer, verbose debug messages for an I/O interface driver are
enabled for inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
ioc-numeric uint32 Numeric equivalents for ioc values.
• 0: Off
• 1: On
iod string Shows whether lower-layer, verbose debug messages for an I/O interface driver are
enabled for inclusion in the Storage Controller debug log.
• Off: Disabled.
• On: Enabled.
iod-numeric uint32 Numeric equivalents for iod values.
• 0: Off
• 1: On
misc string Shows whether internal debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled.
misc-numeric uint32 Numeric equivalents for misc values.
• 0: Off
• 1: On
host2 string Shows whether host/SCSI debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled.
host2-numeric uint32 Numeric equivalents for host2 values.
• 0: Off
• 1: On
raid string Shows whether RAID debug messages are enabled for inclusion in the Storage
Controller debug log.
• Off: Disabled.
• On: Enabled.
API basetype properties 307