CLI Guide

• DRSC: A disk is being scrubbed.
• EXPD: The disk group is being expanded.
• INIT: The disk group is initializing.
• RBAL: The ADAPT disk group is being rebalanced.
• RCON: At least one disk in the vdisk is being reconstructed.
• VDRAIN: The virtual disk group is being removed and its data is being drained to another disk group.
• VPREP: The virtual disk group is being prepared for use in a virtual pool.
• VRECV: The virtual disk group is being recovered to restore its membership in the virtual pool.
• VREMV: The disk group and its data are being removed.
• VRFY: The disk group is being verified.
• VRSC: The disk group is being scrubbed.
• Blank if no job is running.
Job%
• 0%-99%: Percent complete of running job
• Blank if no job is running (job has completed)
Serial Number
The serial number of the disk group.
Spin Down
• Disabled: DSD is disabled for the disk group.
• Enabled - all spinning: DSD is enabled for the disk group.
• Partial spin-down: DSD is enabled for the disk group and its disks are partially spun down to
conserve power.
• Full spin-down: DSD is enabled for the disk group and its disks are fully spun down to conserve
power.
SD Delay
For spinning disks in non-ADAPT disk groups, the period of inactivity after which the disk group’s disks and
dedicated spares will automatically spin down, from 1 to 360 minutes. The value 0 means spin down is
disabled.
Sec Fmt
The sector format of disks in the disk group.
• 512n: All disks use 512-byte native sector size. Each logical block and physical block is 512 bytes.
• 512e: All disks use 512-byte emulated sector size. Each logical block is 512 bytes and each physical block
is 4096 bytes. Eight logical blocks will be stored sequentially in each physical block. Logical blocks may or
may not be aligned with physical block boundaries.
• Mixed: The disk group contains a mix of 512n and 512e disks. This is supported, but for consistent and
predictable performance, do not mix disks of different rotational speed or sector size types (512n, 512e).
Health
• OK
• Degraded
• Fault
• N/A
• Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Action
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Examples
Show information about all linear disk groups.
# show vdisks
Show information about linear disk group vd0002.
254 Alphabetical list of commands