CLI Guide

SCSI Product ID
Shown by the detail parameter. The product identifier returned by the SCSI INQUIRY command.
Enclosure Count
The number of enclosures in the system.
Health
• OK
• Degraded
• Fault
•
N/A
• Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Other MC Status
The operational status of the Management Controller in the partner controller. This is not factored into
system health.
• Operational
• Not Operational
• Not Communicating
• Unknown
PFU Status
Shows whether partner firmware update is running on the system, or is idle.
Supported Locales
Supported display languages.
Examples
Show information about the system.
# show system
Base types
system
status
See also
set system
show system-parameters
show system-parameters
Description
Shows certain storage-system settings and configuration limits. For a summary of the physical and logical
limits of the storage system, see the “System configuration limits” topic in the PowerVault Manager help.
Minimum role monitor
Syntax
show system-parameters
Output
ULP Enabled
Shows that the system is using Unified LUN Presentation, which can expose all LUNs through all host ports
on both controllers. The interconnect information is managed in the controller firmware. ULP appears to the
host as an active-active storage system where the host can choose any available path to access a LUN
regardless of disk group ownership. When ULP is in use, the system’s operating/cache-redundancy mode is
shown as Active-Active ULP. ULP uses the T10 Technical Committee of INCITS Asymmetric Logical Unit
Access (ALUA) extensions, in SPC-3, to negotiate paths with aware host systems. Unaware host systems
see all paths as being equal.
Host Profiles Enabled
242 Alphabetical list of commands