CLI Guide

• In Port: Ingress port in an expansion module. Can be connected to an egress (expansion) port in a
controller module or an expansion module.
• Universal Port: Port that can function as either an egress or ingress port in a controller module or an
expansion module.
Status
• Up: The port is cabled and has an I/O link.
• Warning: Not all of the port's PHYs are up.
• Error: The port is reporting an error condition.
• Not Present: The controller module is not installed or is down.
• Disconnected: Either no I/O link is detected or the port is not cabled.
Health
• OK
• Degraded
• Fault
• N/A
• Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Action
If Health is not OK, this field shows recommended actions to take to resolve the health issue.
Examples
Show the condition of SAS expansion-port connections in each enclosure.
# show sas-link-health
Basetypes
expander-ports
status
show schedules
Description
Shows information about all task schedules.
Minimum role monitor
Syntax
show schedules
[detail]
[schedule-name]
detail
Optional. Shows additional detail about each schedule, with some longer field names, in a vertical format. If
this parameter is omitted, output is shown with some shorter field names in a horizontal format.
schedule-name
Optional. Shows information about the specified schedule only. A name that includes a space must be
enclosed in double quotes. If this parameter is omitted, information is shown for all schedules.
Output
Name
Shown by default. The schedule name.
Schedule Name
Shown by the detail parameter. The schedule name.
Specification
Shown by default. The schedule settings for running the associated task.
232 Alphabetical list of commands