CLI Guide

Port Address
The assigned port address.
Remote Port
The IDs of ports in the remote system.
Reachable Remote Links
Shown by the verify-links parameter. The IDs of linked ports in the remote system.
Reachable Local Links
Shown by the verify-links parameter. The IDs of linked ports in the local system
Examples Show information for all peer connections.
# show peer-connections
Show information for peer connection Peer1.
# show peer-connections Peer1
Show information for peer connection Peer1 and the ports that can be seen from each port.
# show peer-connections Peer1 verify-links
Basetypes
peer-connections
status
See also
create peer-connection
delete peer-connection
query peer-connection
set peer-connection
show pools
Description
Shows information about linear and virtual pools. The command will show information for all pools by default,
or you can use parameters to filter the output. The system can have a maximum of two virtual pools. The
system can have a maximum of two virtual pools.
NOTE: For a virtual pool, new data will not be written to, or existing data migrated to, a
degraded disk group unless it is the only disk group having sufficient available space for the
data.
Minimum role monitor
Syntax
show pools
[type linear|virtual]
[pool]
type linear|virtual
Optional. Specifies whether to show information for linear pools or for virtual pools. If this parameter is
omitted, information will be shown for both types.
pool
Optional. The name or serial number of the pool for which to show information. If this parameter is omitted,
information is shown for all pools
Output
Name
The name of the pool.
Serial Number
The serial number of the pool.
Alphabetical list of commands 213