CLI Guide

You can specify:
• A host by name in the format host-name.*, where * represents all initiators in the host. Example: FC-
Server.*
• A host group by name in the format host-group.*.*, where the first * represents all hosts in the group
and the second * represents all initiators in those hosts. Example: TestLab.*.*
• A volume group by name in the format volume-group.*, where * represents all volumes in the group.
Example:TestVolumes.*
Do not include both host-type and volume-type items in a list. A name that includes a space must be enclosed
in double quotes.
Output
Properties are described in alphabetical order.
Access
Type of host access to the volume:
• read-write: Read and write.
• read-only: Read only.
• no-access: No access (masked).
• not-mapped: Not mapped.
Group Name
For a volume group, its name in the format volume-group.*, where the * represents all volumes in the
group.
ID
Shown by the initiator parameter. For an FC initiator, its WWPN. For a SAS initiator, its WWPN. For an
iSCSI initiator, its node name (typically the IQN).
Host-Port-Identifier (v2)For an FC initiator, its WWPN. For a SAS initiator, its WWPN. For an iSCSI
initiator, its node name (typically the IQN).
• all other initiators: The volume's default mapping.
Identifier (v3)
See Host-Port-Identifier, above.
Initiator-Identifier
Shown for a volume group mapping.
• For an FC initiator, its WWPN. For a SAS initiator, its WWPN. For an iSCSI initiator, its node name
(typically the IQN).
• all other initiators: The volume's default mapping.
LUN
• The LUN that identifies the volume to a host.
• For a volume group, * means multiple LUNs are represented in the group.
• Blank if not mapped or mapped as no-access.
Name
The name of a volume or initiator.
Nickname
• For a host, its name in the format host-name.*, where the * represents all initiators in the host.
• For a host group, its name in the format host-group.*.*, where the first * represents all hosts in the
host group and the second * represents all initiators in those hosts.
• Blank if not set or for all other initiators/
Ports
• The controller host ports to which the mapping applies.
• Blank if not mapped or mapped as no-access.
Profile
Alphabetical list of commands
209