CLI Guide

Examples Show about all fans in the system.
# show fans
Basetypes fan
status
See also show power-supplies
show fde-state
Description Shows Full Disk Encryption information for the storage system.
NOTE:
If you insert an FDE disk into a secured system and the disk does not come up in the expected state, perform
a manual rescan by using the rescan command.
Minimum role monitor
Syntax
show fde-state
Output
FDE Security Status
• Unsecured. The system has not been secured with a passphrase.
• Secured. The system has been secured with a passphrase.
• Secured, Lock Ready. The system has been secured and lock keys have been cleared. The system
will become locked after the next power cycle.
• Secured, Locked. The system is secured and the disks are locked to data access, preventing their
use.
Lock Key ID
The current lock ID is displayed.
Import Key ID
The previous or import lock ID is displayed.
FDE Configuration Time
If the system is secured, the time at which the current lock ID was set.
Examples Show FDE information.
# show fde-state
Basetypes
fde-state
status
See also
clear fde-keys
set fde-import-key
set fde-lock-key
set fde-state
show fenced-data
Description
Shows information about fenced data blocks in the storage system. The command will show information for
all fenced blocks by default, or you can use parameters to filter the output.
Fenced data blocks are blocks of data on disk which, for either of the following reasons, cannot be recovered
and have been lost:
198 Alphabetical list of commands