CLI Guide

show power-supplies
show fans
Description
Shows information about each fan in the storage system.
To see information about the fan modules that contain each pair of fans, use the show fan-modules
command.
Minimum role monitor
Syntax
show fans
Output
Name
The fan name.
Location
The fan location in the format Enclosure enclosure-ID- position. The position is as viewed from the back of
the enclosure.
Status
• Up
• Error
• Off
• Missing
Speed
The fan speed (revolutions per minute).
Position
The fan position, as viewed from the back of the enclosure:
• Left
• Right
• N/A
Serial Number
• (blank): Not applicable.
Part Number
• (blank): Not applicable.
Firmware version
• (blank): Not applicable.
• The firmware revision of a fan FRU.
Hardware version
• (blank): Not applicable.
Health
• OK
• Degraded
• Fault
• N/A
• Unknown
Reason
If Health is not OK, this field shows the reason for the health state.
Action
If Health is not OK, this field shows recommended actions to take to resolve the health issue
Alphabetical list of commands
197