CLI Guide
Output
Email Notification
• Disabled: Email notification is disabled.
• Enabled: Email notification is enabled.
Email Notification Filter
Shows the minimum severity for which the system should send notifications:
• crit: Sends notifications for Critical events only.
• error: Sends notifications for Error and Critical events.
• warn: Sends notifications for Warning, Error, and Critical events.
• resolved: Sends notifications for Resolved, Warning, Error, and Critical events.
• info: Sends notifications for all events.
• none: Disables email notification. This is the default. If this option is specified, no other parameters are
required and their current values are not changed.
This parameter does not apply to managed-logs .
Email Address (1–3)
Shows up to three email addresses for recipients of event notifications.
Log Destination
Shows the email address for the log collection system used by the managed logs feature
Security Protocol
• tls: Enables Transport Layer Security (TLS) authentication. The standard ports for TLS are 25 or 587.
• ssl: Enables Secure Sockets Layer (SSL) authentication. The standard port for SSL is 465.
• none: Do not use a security protocol. The standard port is 25. This setting is the system default.
Server PortThe port on which the configured SMTP server is listening. This is either automatically
configured to a default setting by the system, or has been overridden by the user.
Email Server
The IP address or domain name of the SMTP mail server to use for the email messages.
Email Domain
The domain name that, with the sender name, forms the “from” address for remote notification.
Email Sender
The sender name that, with the domain name, forms the “from” address for remote notification.
Email Sender Password
The sender password. For a configured sender, the password is represented by eight asterisks
Include Logs
Shows whether system log files will automatically be attached to email notification messages generated by
the managed logs feature. This is the “push” mode for managed logs
Examples
Show settings for email notification.
# show email-parameters
Basetypes
email-parameters
status
See also
set dns-parameters
set email-parameters
show dns-parameters
190 Alphabetical list of commands