CLI Guide

Shown by the detail or fde parameter. The FDE state of the disk:
• Unknown: The FDE state is unknown.
• Not FDE Capable: The disk is not FDE-capable.
• Not Secured: The disk is not secured.
• Secured, Unlocked: The system is secured and the disk is unlocked.
• Secured, Locked: The system is secured and the disk is locked to data access, preventing its use.
• FDE Protocol Failure: A temporary state that can occur while the system is securing the disk.
Health
Shown by default or by the detail, fde, or perf parameter.
• OK
• Degraded
• Fault
• N/A
• Unknown
Health Reason
Shown by the detail parameter. If Health is not OK, this field shows the reason for the health state.
Health Recommendation
Shown by the detail parameter. If Health is not OK, this field shows recommended actions to take to
resolve the health issue.
I/O Resp Time
Shown by the perf parameter. The average time in microseconds to complete I/O.
Jobs
Shown by default.
• DRSC: The disk is being scrubbed.
• EXPD: The disk group is being expanded.
• INIT: The disk group is being initialized.
• RBAL: The ADAPT disk group is being rebalanced.
• RCON: The disk is being used in a reconstruct operation.
• VDRAIN: The virtual disk group is being removed and its data is being drained to another disk group.
• VPREP: The virtual disk group is being prepared for use in a virtual pool.
• VRECV: The virtual disk group is being recovered to restore its membership in the virtual pool.
• VREMV: The disk group and its data are being removed.
• VRFY: The disk group is being verified.
• VRSC: The disk group is being scrubbed.
• Blank if no job is running.
LED Status
Shown by the detail parameter. The disk LED status:
• Rebuild: The disk's disk group is being reconstructed.
• Fault: The disk has a fault.
• ID: The disk's identification LED is illuminated.
• Remove: The disk is ready to be removed from the enclosure.
• Blank if the disk is not part of a disk group or is spun down.
Location
Shown by default and by any parameter except encl. The disk location in the format enclosure-ID.slot-
number.
Lock Key ID
Shown by the fde parameter. The current lock key ID.
Model
Alphabetical list of commands
181