CLI Guide

Optional. For all or specified disks, this parameter shows performance statistics from the latest historical
sample for each disk. Statistics shown include total I/Os (reads and writes), total amount of data transferred,
and average I/O response time.
temp
Optional. Shows the temperature for all installed disks.
vdisk vdisks
Optional. A comma-separated list of the IDs or serial numbers of linear disk groups for which to show disk
information. A name that includes a space must be enclosed in double quotes.
Output
usage available|failed|leftover|pool|spares|unusable
Shows information about disks having specific Usage values:
• available: Disks whose usage is AVAIL.
• failed: Disks whose usage is FAILED
• leftover: Disks whose usage is LEFTOVR.
• pool: Disks whose usage is VIRTUAL POOL. Disks whose usage is LINEAR POOL or VDISK. Disks
whose usage is LINEAR POOL, VIRTUAL POOL, or VDISK.
• spares: Disks whose usage is GLOBAL SP. Disks whose usage is DEDICATED SP, GLOBAL SP, or
VDISK SP. Disks whose usage is DEDICATED SP, GLOBAL SP, or VDISK SP.
• unusable: Disks whose usage is UNUSABLE.
For explanation of usage values, see the Usage property description below. You cannot use this parameter
with any other parameter.
disks
Optional. Either:
A comma-separated list of the IDs of disks about which to show information. For disk syntax, see Command
syntax
• all: Shows information about all installed disks.
• free: Shows information about all disks that are available.
Properties are described in alphabetical order.
Current Job
Shown by the detail parameter. See Jobs, below.
Data Transferred
Shown by the perf parameter. The total number of bytes transferred.
Description
Shown by default or by the detail, fde, or perf parameter.
• SAS: Enterprise SAS spinning disk.
• SAS MDL: Midline SAS spinning disk.
• SSD SAS: SAS solid-state disk.
Disk Group (v3)
Shown by default or by the detail parameter. The name of the disk group that contains the disk.
Drawer ID
Shown by the detail parameter. The ID of the drawer containing the disk.
Drive Spin Down Count
Shown by the detail parameter. The number of times the DSD feature has spun down this disk.
Encl
Shown by the encl parameter. The number of the enclosure where the disk is located.
FDE State
180
Alphabetical list of commands