CLI Guide

NOTE: You cannot rename a volume group that is in a replication set.
Minimum role manage
Syntax
set volume-group
name new-name
volume-group
Parameters
name new-name
A new name for the volume group. Input rules:
• The value is case sensitive.
• The value can have a maximum of 32 bytes.
• The value can include spaces and printable UTF-8 characters except: " , .< \
• A value that includes a space must be enclosed in double quotes.
volume-group
The current name of the volume group. A value that includes a space must be enclosed in double quotes.
Examples Change the name of VGroup1 to MyVGroup.
# set volume-group name MyVGroup VGroup1
See also show volume-groups
show advanced-settings
Description
Shows the settings for advanced system-configuration parameters.
Minimum role monitor
Syntax show advanced-settings
Output
Disk Group Background Scrub (v3)
Shows whether disks in disk groups are automatically checked for disk defects to ensure system health. The
interval between a scrub finishing and starting again is specified by the Disk Group Background Scrub
Interval field.
• Disabled :Background disk scrub is disabled.
• Enabled: Background disk scrub is enabled.
Vdisk Background Scrub (v2)
Shows whether disks in disk groups are automatically checked for disk defects to ensure system health. The
interval between a scrub finishing and starting again is specified by the Vdisk Background Scrub
Interval field.
• Disabled: Background disk scrub is disabled.
• Enabled: Background disk scrub is enabled.
Disk Group Background Scrub Interval (v3)
Shows the interval between background disk-group scrub finishing and starting again, from 0 to 360 hours.
Vdisk Background Scrub Interval (v2)
Shows the interval between background disk-group scrub finishing and starting again, from 0 to 360 hours.
Partner Firmware Upgrade
Shows whether component firmware versions are monitored and will be automatically updated on the partner
controller.
• Disabled: Partner firmware upgrade is disabled.
• Enabled: Partner firmware upgrade is enabled. This is the default.
Utility Priority
160
Alphabetical list of commands