CLI Guide

[write-community string]
Optional. Sets a community string for write access. This string must differ from the read-community string.
Input rules:
• The value is case sensitive.
• The value can have a maximum of 31 bytes.
• The value can include any characters characters except: " <>
• A value that includes a space must be enclosed in double quotes.
The default is private.
Examples Enable Critical events only, specify a trap host, and set the community string for read-only access.
# set snmp-parameters enable crit add-trap-host 172.22.4.171 read-community
public
See also
set protocols
show snmp-parameters
test (with the snmp parameter)
set support-assist
Description Sets parameters for the SupportAssist feature.
When you specify to enable this feature, the CLI will present an agreement with a confirmation prompt. The
agreement allows remote monitoring of the storage system, collection of diagnostic information, and
transmission of that data to a remote support server. Reply yes to enable the support service or no to leave it
disabled.
After enabling the service, you can use the set support-assist-info command to enter customer
information, and then use the check support-assist command to check connectivity to the
SupportAssist server
Minimum role standard
Syntax
set support-assist
[maintenance-mode enabled|disabled|on|off]
[state pause|resume]
[enabled|disabled|on|off]
Parameters At least one parameter must be specified.
maintenance-mode [enabled|disabled|on|off]
Optional. Puts the system into maintenance mode to notify SupportAssist not to create support tickets during
planned system downtime.
• enabled or on – Enables maintenance mode.
• disabled or off – Disables maintenance mode. This is the default.
NOTE: If you specify the maintenance-mode parameter, do not specify other parameters.
[state pause|resume]
Optional. Allows you temporarily suspend the service without disabling the feature.
• pause – Suspends transmitting data to the support server.
• resume – Resumes transmitting data to the support server from the moment the service is resumed.
[enabled|disabled|on|off]
Optional.
• enabled or on – Enables the SupportAssist feature.
Alphabetical list of commands 147