Administrator Guide

You can enable or disable the SLP service in the PowerVault Manager, as described in Enable or disable system-management settings on
page 44, or by using the CLI set protocols command, as described in the Dell EMC PowerVault ME4 Series Storage System CLI
Guide.
If the SLP service is enabled, you can test it by using an open source tool, such as slptool from www.openslp.org.
Table 39. Interfaces advertised by SLP
Interface (protocol) description Advertisement string
HTTP
service:api:http
HTTPS
service:api:https
Telnet
service:ui:telnet
SSH
service:ui:ssh
FTP/SFTP (firmware upgrade)
service:firmware-update:ftp/sftp
SNMP
service:api:snmp
Table 40. SLP attributes shown for a storage system
SLP attribute Corresponding property shown by the CLI show
systemdetail command in XML API mode
x-system-name system-name
x-system-contact system-contact
x-system-location system-location
x-system-information system-information
x-midplane-serial-number midplane-serial-number
x-vendor-name vendor-name
x-product-id product-id
x-product-brand product-brand
x-wwnn current-node-wwn
x-platform-type platform-type
x-bundle-version
no correspondingproperty
x-build-date
no correspondingproperty
x-mac-address
no correspondingproperty
x-top-level-assembly-part-number
no correspondingproperty
x-top-level-assembly-serial-number
no correspondingproperty
Other management interfaces 163