Administrator Guide

Table 30. FA MIB 2.2 objects, descriptions, and values (continued)
Object Description Value
connUnitPortIndex
Unique value for each
connUnitPortEntry between 1 and
connUnitNumPorts
Unique value for each port, between 1 and
the number of ports
connUnitPortType
Port type not-present (3), or n-port (5) for point-to-
point topology, or l-port (6)
connUnitPortFCClassCap
Bit mask that specifies the classes of
service capability of this port. If this is not
applicable, returns all bits set to zero.
Fibre Channel ports return 8 for class-three
connUnitPortFCClassOp
Bit mask that specifies the classes of
service that are currently operational. If this
is not applicable, returns all bits set to zero.
Fibre Channel ports return 8 for class-three
connUnitPortState
State of the port hardware unknown (1), online (2), offline (3),
bypassed (4)
connUnitPortStatus
Overall protocol status for the port
unknown (1), unused (2), ok (3), warning
(4), failure (5), notparticipating(6),
initializing (7), bypass (8)
connUnitPortTransmitterType
Technology of the port transceiver unknown (1) for Fibre Channel ports
connUnitPortModuleType
Module type of the port connector unknown (1)
connUnitPortWwn
Fibre Channel World Wide Name (WWN) of
the port if applicable
WWN octet for the port, or empty string if
the port is not present
connUnitPortFCId
Assigned Fibre Channel ID of this port Fibre Channel ID of the port. All bits set to 1
if the Fibre Channel ID is not assigned or if
the port is not present
connUnitPortSn
Serial number of the unit (for example, for a
GBIC). If this is not applicable, returns an
empty string.
Empty string
connUnitPortRevision
Port revision (for example, for a GBIC) Empty string
connUnitPortVendor
Port vendor (for example, for a GBIC) Empty string
connUnitPortSpeed
Speed of the port in KByte per second (1
KByte = 1000 Byte)
Port speed in KByte per second, or 0 if the
port is not present
connUnitPortControl
Not supported invalid (2) for an SNMP GET operation and
not settable through an SNMP SET
operation
connUnitPortName
String describing the addressed port See External details for certain FA MIB 2.2
objects
connUnitPortPhysicalNumber
Port number represented on the hardware Port number represented on the hardware
connUnitPortStatObject
Not supported 0 (No statistics available)
connUnitEvent Table Includes the following objects as specified by the FA MIB2.2 Spec:
connUnitEventUnitId
connUnitId of the connectivity unit that
contains this port
Same as connUnitId
connUnitEventIndex
Index into the connectivity unit’s event
buffer, incremented for each event
Starts at 1 every time there is a table reset
or the unit’s event table reaches its
maximum index value
connUnitEventId
Internal event ID, incremented for each
event, ranging between 0 and
connUnitMaxEvents
Starts at 0 every time there is a table reset
or connUnitMaxEvents is reached
Other management interfaces 143