Release Notes

Table 32. Fixed replication issues (continued)
Issue Description
49070 When a replication set is created in ME Storage Manager, the replication schedule window is not displayed
when the Scheduled check box is selected.
49020 When a volume-copy operation is in progress, trying to delete the destination volume causes the improper
message Error: Bad parameter(s) were specified to be displayed.
48923 When a replication set is created in ME Storage Manager, a warning message might be displayed even if
the command is successful and the replication set is created.
Table 33. Fixed storage management issues
Issue Description
51509 Pool A might go offline after a taking a snapshot.
51311 When creating a Linear disk group in ME Storage Manager, selecting the Select All check box might result
in an error message about too many disks selected to expand.
51221 In ME Storage Manager, the chunk size drop-down menu is not available when creating a disk group.
51189 A storage system in single-controller mode might send Killed partner events during every boot.
51078 A single ADAPT disk group might remain offline after a power failure due to disks failing come online.
51071 In ME Storage Manager, the Storage Setup panel displays the wrong suffix in the Size column.
51022 Improved drive reliability by instructing the storage system to fail a drive and start a rebuild action if the
drive experiences six read errors in an hour.
51003 ME Storage Manager cannot update network IPs for single-controller storage systems.
50925 In the CLI, the set network-parameter IP command does not work for single-controller storage
systems.
50865 In the CLI, the set host-port-mode command displays both FC and iSCSI options for 10Gbase-T iSCSI
controllers.
50864 Dell switches fail to report as Dell devices for Register Symbolic Port Name (RSPN_ID) requests.
50863 In ME Storage Manager, the option to change between iSCSI and FC host port mode is not functioning
correctly.
50849 In the CLI, the output of the ping command is misleading.
50826 ATS is now supported on the 10Gbase-T iSCSI controller.
50419 ME Storage Manager might continue to display a volume after it is deleted.
50223 In ME Storage Manager with the German locale enabled, some text overruns buttons and some field labels
are in English.
50182 The browser tab title displays an incorrect vendor name whenever the restore defaults or reset
dns-management-hostname CLI commands are used. This issue occurs if a custom DNS hostname was
configured before issuing the commands.
50133 In ME Storage Manager, setting DNS parameters to the same values that are already set fails with the
error Command is taking longer to complete than anticipated.
50115 In ME Storage Manager, the Performance topic does not display performance data for virtual pools.
50046 In ME Storage Manager, changing a user password and selecting another user without first applying the
change causes the confirmation dialog to behave unexpectedly.
49948 After restarting the Storage Controller, an ME Storage Manager session can stop responding.
49934 Exporting historical statistics might fail when using ME Storage Manager in Internet Explorer.
49863 DNS settings remain unchanged after issuing the clear dns-parameters CLI command, despite the
system displaying a success message.
20 GT280R004-01 Firmware