White Papers

34
Dell EMC PowerVault ME4 Series and Citrix XenServer | H18237
6.3 Verify multipath status
To view the status of the multipath from the XenCenter GUI, select the new SR from the list of objects
and expand the Multipathing dropdown section as shown in Figure 10.
Display multipath status from GUI
Furthermore, you can also verify that multipathing is working, using the CLI command multipath -ll:
2. Using an SSH tool, like Putty, to connect to your Host.
3. Execute the command multipath -ll, you should receive an output similar to the following:
Note: The amount of session you see, depends on the amount of physical connections are present. If you are
using a SAS HBA to connect to the ME4, you will only see 2 sessions.