White Papers
17
Dell EMC PowerVault ME4 Series and Citrix XenServer | H18237
2.
Select Network Settings, input the MTU of 8860 (default value is 1500), and deselect the checkbox
so this network will not be added to new VMs.
3.
Repeat steps 1–2 for each additional network dedicated for iSCSI storage.
4.2.2.2
Optional steps: implementing Jumbo Frames on the Dell EMC PowerVault ME4
1.
In the PowerVault Manager navigate to the Home tab, click on Action and select System Settings.
2.
In the System Settings, navigate to the Ports tab and switch to Advanced Settings and check the box
for Jumbo frames.