Support Matrix

Supported Fibre Channel host bus adapters
The following table lists the HBAs that have been tested for use within ME4 Series storage systems:
NOTE: This table does not imply that all of the HBAs and their driver/firmware stacks are supported by any or all server
vendors. You must ensure that the HBA and its associated drivers are included on the hardware compatibility list of the
vendor. This recommendation also applies to Dell EMC PowerEdge server products. Inclusion in this HBA compatibility
tables should not be interpreted as that the HBA and driver/firmware combination as being supported by any vendor for use
with their server products.
Table 19. ME4 Series Fibre Channel HBAs
Host bus
adapter
name
Direct-attach
configuration
Fabric
configuration
Dell Part Number Available From
QLogic
QLE2660v2 H28RN (full height)
4MNKF (low-profile)
Dell
QLE2662v2 H8T43 (full height)
3PCN3 (low-profile)
Dell
QLE2690 P8PCK (full height)
P3T0T (low-profile)
Dell
QLE2692 CK9H1 (full height)
WVT0T (low-profile)
Dell
QLE2670 N/A https://driverdownloads.qlogic.com/
QLE2672 N/A https://driverdownloads.qlogic.com/
QLE2560 N/A https://driverdownloads.qlogic.com/
QLE2562 N/A https://driverdownloads.qlogic.com/
Emulex
LPe16000v3 61M2K (full height)
11H8D (low-profile)
Dell
LPe16002v3 F3VJ6 (full height)
6VK2R (low-profile)
Dell
LPe31000 3T3T7 (full height)
6CWM6 (low-profile)
Dell
LPe31002 RXNT1 (full height)
VGJ12 (low-profile)
Dell
LPe12000 N/A https://www.broadcom.com/support/
emulex
18
Supported Fibre Channel host bus adapters 29