Support Matrix
Table Of Contents
- Dell EMC PowerVault ME4 Series Storage System Support Matrix
- Contents
- Introduction
- Supported data protocols
- ME4 Series storage system rules
- Default IPv4 Settings for management ports
- Default IPv4 settings for iSCSI ports
- Supported RAID controller firmware
- Supported iSCSI software initiators
- Supported protocol offload (TOE/iSCSI) adapters
- Supported Fibre Channel and iSCSI SFP+ transceivers
- Supported SAS and Twinax direct-attach cables
- Supported hard drives
- Supported expansion enclosures
- Supported management software
- Supported operating systems
- Operating systems with ALUA support
- Supported device mapper software
- Supported SAS host bus adapters
- Supported Fibre Channel host bus adapters
- Supported Fibre Channel and iSCSI direct-attach configuration operating systems
- Dell EMC Storage Support Policy
Supported SAS host bus adapters
This chapter lists the server HBAs that have been tested for use with ME4 Series storage systems. However, it does not imply
that these HBAs are supported by any or all server vendors.
ME4 Series storage systems support the following HBAs:
● Dell HBA355e for PowerEdge 15th generation servers
● Dell 12 Gbps SAS HBA for PowerEdge 13th, 14th, and 15th generation servers
You can download the supported drivers and firmware for the HBAs from https://www.dell.com/support. To determine if a Dell
EMC PowerEdge server supports an adapter, see the support matrix for that server.
17
28 Supported SAS host bus adapters