Support Matrix

Table 17. Supported ME4 Series operating systems (continued)
Operating System SAS host
server
Fibre Channel
host server
iSCSI host
server
Notes & required hotfixes
Red Hat Enterprise Linux 7.4 (x64
only)
● Basic Server install
(Minimum)
● Device Mapper multipath
is required for multipath
support.
Red Hat Enterprise Linux 6.9 (x64
only)
● Basic Server install
(Minimum)
● Device Mapper multipath
is required for multipath
support.
SUSE Linux Enterprise Server (SLES)
SUSE Linux Enterprise Server 15 SP2
(x64 only)
● Basic Server install
(Minimum)
● Device Mapper multipath
is required for multipath
support
SUSE Linux Enterprise Server 15 SP1
(x64 only)
● Basic Server install
(Minimum)
● Device Mapper multipath
is required for multipath
support
SUSE Linux Enterprise Server 15 (x64
only)
● Basic Server install
(Minimum)
● Device Mapper multipath
is required for multipath
support
SUSE Linux Enterprise Server 12.3
(x64 only)
● Basic Server install
(Minimum)
● Device Mapper multipath
is required for multipath
support
Virtualization Hosts / Hypervisors
Citrix XenServer 7.6 Dynamic multipathing support is
available for Fibre Channel and
iSCSI hosts
Citrix XenServer 7.5 Dynamic multipathing support is
available for Fibre Channel and
iSCSI hosts
Citrix XenServer 7.1 CU2 Dynamic multipathing support is
available for Fibre Channel and
iSCSI hosts
VMware vSphere 7.0 U2 For supported firmware
versions, see VMware HCL
Supported path policies: MRU
and RR
NOTE: For information
about ATS Initialization
failing for SAS Storage using
7.0 U2, see VMware KB
article 83249.
24 Supported operating systems