CLI Guide

Layer 2 Switching Commands 416
• fortygigabitethernet—Shows the traffic for the specified 40-Gigabit
Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the fields shown in the display:
Field Description
InOctets Counted received octets.
InUcastPkts Counted received unicast packets.
InMcastPkts Counted received multicast packets.
InBcastPkts Counted received broadcast packets.
OutOctets Counted transmitted octets.
OutUcastPkts Counted transmitted unicast packets.
OutMcastPkts Counted transmitted multicast packets.
OutBcastPkts Counted transmitted broadcast packets.
Alignment Errors A count of frames received that are not an integral number
of octets in length and do not pass the FCS check.
FCS Errors Counted frames received that are an integral number of
octets in length but do not pass the FCS check.
Single Collision Frames Counted frames that are involved in a single collision, and
are subsequently transmitted successfully.
Multiple Collision
Frames
A count of frames that are involved in a multiple collision,
and are subsequently transmitted successfully
Late Collisions Counted times that a collision is detected later than one
slot time into the transmission of a packet.