CLI Guide

Layer 3 Routing Commands 1543
ipv6 route 0.0.0.0 0.0.0.0 10.130.167.129 track 10 state is [up]
show ip route preferences
Use the show ip route preferences command to display the default route
preference value for each origin.
Syntax
show ip route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Route preferences are used in determining the best route. Lower router
preference values are preferred over higher router preference values. This
command displays the route preferences for each possible route origin.
Example
The following example displays IP route preferences.
console#show ip route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra-area routes......................... 110
OSPF Inter-area routes......................... 110
OSPF External routes........................... 110
RIP............................................ 120
BGP External................................... 20
BGP Internal................................... 200
BGP Local...................................... 200
Configured Default Gateway..................... 253
DHCP Default Gateway........................... 254