CLI Guide

Security Commands 1053
Example
The following example specifies the timeout setting for the designated
RADIUS Server.
console(config)#radius server host 192.143.120.123
console(config-radius)#timeout 20
usage authmgr
Use the usage authmgr command in RADIUS mode to specify the usage type
of the server.
Syntax
usage authmgr type
• type — The type can be one of the following values: login, authmgr, or all.
Default Configuration
The default variable setting is all.
Command Mode
RADIUS Server Configuration mode
User Guidelines
The administrator must enter the auth or acct mode corresponding to a
specific RADIUS server before executing this command. This command has
no effect on accounting servers.
Use this command to restrict the types of authentication sent to a particular
RADIUS server. The login selection restricts authentication requests to
switch administrator logins. The authmgr setting restricts authentication
requests to 802.1x and MAB authentications.
Command History
Syntax updated in version 6.6 firmware.