Users Guide

Layer 3 Routing Commands 1863
Example
The following example displays the OSPF stub table.
console#show ipv6 ospf stub table
AreaId TypeofService Metric Val Import SummaryLSA
------------ ------------- ---------- -----------------
0.0.0.10 Normal 1 Enable
Command History
Syntax to support VRFs added in version 6.7.0 firmware.
show ipv6 ospf virtual-link
Use the show ipv6 ospf virtual-link command to display the OSPF Virtual
Interface information for a specific area and neighbor or for all areas in the
system.
Syntax
show ipv6 ospf virtual-link [vrf vrf-name ] [ area-id neighbor-id | brief]
•
vrf-name — The name of an existing VRF instance.
•
area-id — Identifies the OSPF area whose virtual interface information is
being displayed.
•
neighbor-id — Router ID of neighbor.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes, VRF Configuration
User Guidelines
This command has no user guidelines.