Users Guide

Table Of Contents
Layer 3 Routing Commands 1860
show ipv6 ospf range
Use the show ipv6 ospf range command to display information about the area
ranges for the specified area identifier.
Syntax
show ipv6 ospf range
areaid
[vrf
vrf-name
]
areaid
— Identifies the OSPF area whose ranges are being displayed.
vrf-name
— The name of an existing VRF instance.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes, VRF Configuration
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for area 1.
console#show ipv6 ospf range 1
Area ID IPv6 Prefix/Prefix Length Lsdb Type Advertisement
--------- ------------------------- --------------- -------------
Command History
Syntax to support VRFs added in version 6.7.0 firmware.
show ipv6 ospf statistics
Use this command to display information about the 15 most recent Shortest
Path First (SPF) calculations. SPF is the OSPF routing table calculation.
Syntax
show ipv6 ospf statistics [vrf
vrf-name
]