Users Guide

Layer 3 Routing Commands 1847
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID........................................ 0.0.0.1
External Routing.............................. Import External LSAs
Spf Runs...................................... 0
Area Border Router Count...................... 0
Area LSA Count................................ 0
Area LSA Checksum............................. 0
Stub Mode..................................... Disable
Import Summary LSAs........................... Enable
Command History
Syntax to support VRFs added in version 6.7.0 firmware.
show ipv6 ospf asbr
The show ipv6 ospf asbr command displays the internal OSPFv3 routes to
reach Autonomous System Boundary Routes (ASBR). This command takes
no options.
Syntax
show ipv6 ospf asbr [vrf vrf-name ]
•
vrf-name — The name of an existing VRF instance.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes, VRF Configuration
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf asbr
Type Router Id Cost Area ID Next Hop Next Hop