Users Guide

160 Dell EMC Networking CLI
Data Center Commands
OpenFlow
ip ssh port Specifies the port to be used by the SSH server. GC
ip ssh pubkey-auth Enables public key authentication for incoming
SSH sessions.
GC
ip ssh server Enables the switch to be configured from a SSH
server connection.
GC
key-string Manually specifies a SSH public key. SK
ssh Establishes an outboard connection to a remote
SSH server from the switch console.
PE
ssh session-limit Limits the number of outbound SSH sessions. GC
ssh time-out Configures the delay upon which idle SSH
sessions are terminated.
GC
show crypto key mypubkey Displays its own SSH public keys stored on the
switch.
PE
show crypto key pubkey-
chain ssh
Displays SSH public keys stored on the switch. PE
show ip ssh Displays the SSH server configuration. PE
show ssh Displays the outbound SSH configuration and
session count.
PE,
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
controller Configures a connection to an OpenFlow
controller
OFC
hardware profile openflow Selects the forwarding mode for the OpenFlow
hybrid capability.
GC
ipv4 address Assigns the IPv4 source address utilized for
controller connections.
OFC
Command Description Mode
a