Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsEMC PowerSwitch N3100 Series
1581158215831584158515861587158815891590
Table Of Contents
Layer 3 Routing Commands 1584
clear ipv6 ospf redistribution
Use this command to flush all self-originated external LSAs. Re-apply the
redistribution configuration and re-originate prefixes as necessary.
Syntax
clear ipv6 ospf redistribution [vrf
vrf-name
]
•
vrf-name
—The name of an existing VRF instance.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, VRF Configuration
User Guidelines
This command has no user guidelines.
Command History
Syntax to support VRFs added in version 6.7.0 firmware.
clear ipv6 ospf stub-router
Use the clear ipv6 ospf stub-router command to force OSPF to exit stub
router mode when it has automatically entered stub router mode because of a
resource limitation.
Syntax
clear ipv6 ospf stub-router [vrf
vrf-name
]
•
vrf-name
—The name of the VRF instance on which the command
operates. If no VRF parameter is given, counters for the default (global)
router instance is cleared.
Default Configuration
There is no default configuration for this command.