Users Guide

Table Of Contents
106 Dell EMC Networking CLI
VC — VLAN Configuration (reached via vlan command)
VRC—VRF Configuration
VR—Virtual Router Configuration
VRRP—VRRPv3 Group Configuration
v6ACL — IPv6 Access List Configuration
v6CMC — IPv6 Class-Map Configuration
v6DP — IPv6 DHCP Pool Configuration
Layer 2 Commands
ACL
Command Description Mode
a
ip access-list
Creates an Access Control List (ACL) that is
identified by the parameter
accesslistnumber.
GC
deny | permit (IP ACL)
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
deny | permit (Mac-Access-
List-Configuration)
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
ip access-group
Attaches a specified access-control list to an
interface.
GC or
IC
mac access-group
Attaches a specific MAC Access Control List
(ACL) to an interface in the in-bound
direction.
GC or
IC
mac access-list extended
Creates the MAC Access Control List (ACL)
identified by the
name
parameter.
GC
mac access-list extended
rename
Renames the existing MAC Access Control List
(ACL) name.
GC