Users Guide

Switch Management Commands 2341
Command Mode
Global Configuration
User Guidelines
The Telnet server TCP port should not be set to a value that might conflict
with other well-known protocol port numbers used on this switch.
UDP, TCP and RAW ports reserved by the switch and unavailable for use or
configuration are:
Ports 1, 17, 58, 255, 546, 547, 2222, 4567, 6343, 49160
Example
console(config)#ip telnet port 1045
console(config)#no ip telnet port
show ip telnet
The show ip telnet command displays the status of the Telnet server and the
Telnet TCP port number.
Syntax
show ip telnet
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
Example
console#show ip telnet
Telnet Server is Enabled. Port:23