Users Guide

Layer 3 Routing Commands 1430
Command History
Introduced in version 6.2.0.1 firmware.
Example
console#show ip community-list
Standard community list buzz
permit 100:200
permit 100:300
permit 100:400
Standard community list woody
permit 200:1
permit 200:2
permit 200:3
show ip prefix-list
This command displays the contents of IPv4 prefix lists.
Syntax
show ip prefix-list [detail [prefix-list-name] | summary [prefix-list-name] |
prefix-list-name [network mask [longer] [first-match] | seq sequence-
number ]] [detail | summary] prefix-list-name [network network-mask ]
[seq sequence-number] [longer] [first-match]
• detail | summary—(Optional) Displays detailed or summarized
information about all prefix lists.
• prefix-list-name—(Optional) The name of a specific prefix list.
• network—(Optional) The network number
• mask—Required if a network is specified. The network mask dotted-quad
notation. In dotted-quad notation, the 1 bits must be contiguous and left
justified.
• seq sequence-number—(Optional) Applies the sequence number to the
prefix list entry. The sequence number of the prefix list entry.
• longer—(Optional) Displays all entries of a prefix list that are more
specific than the given network/length.
• first-match—(Optional) Displays the entry of a prefix list that matches
the given network.